If it is necessary to adjust the direction of the joint, turn the cylinder block or piston rod clockwise.

1. The piston rod of the stainless steel gas spring must be installed downwards and not inverted to reduce friction and ensure good shock absorption quality and cushioning performance. 2. Determining the installation position of the fulcrum is a guarantee for the normal operation of the stainless steel gas spring. The gas spring must be installed in the correct way, that is, when it is closed, let it move on the centerline of the structure, otherwise the gas spring will usually automatically reset.

Jan 08,2024

The efficacy, advantages, and disadvantages of gas springs

Taking two different loads applied to the same gas spring as an example, consider these situations. A larger mass will have a lower oscillation frequency. At the same time, gas springs with low loads will move a lot. For electromagnetic flow meters, various chemicals of the same volume have different masses due to their relative density, which can be considered as this load. Among them, the piping is similar to the gas spring in the example. That is to say, the higher the density of material in the flow, the lower the oscillation frequency of the boundary layer. According to this basic principle, the mechanical equipment specifies the relative density of the tested material.

Dec 12,2023

Reasonable use and installation precautions of gas springs

1、 What is the function of gas springs? Gas springs are industrial components that play functions such as support, buffering, braking, height adjustment, and angle adjustment. In engineering machinery, they are mainly used in parts such as cylinder heads and doors.

Dec 12,2023

How to determine the elasticity of gas springs?

How to disassemble the gas spring? Answer: Before disassembling the gas spring, drill a small circular hole at the bottom of the gas spring to allow the gas and oil inside to be discharged, and then disassemble it. But it cannot be dismantled casually as it may cause damage.

Dec 12,2023

What is a gas spring support rod?

Gas spring support rod is an industrial accessory that can support, cushion, brake, adjust height and angle. Including pressure cylinder, piston rod, piston, sealing guide sleeve, packing (inert gas or oil gas mixture), in cylinder control elements and out of cylinder control elements (see controllable gas spring), connectors, etc. The principle of gas spring support rod is to fill a sealed pressure cylinder with inert gas or gas mixture, so that the pressure of the chamber can be increased to several times or tens of times the air pressure. The movement of the piston rod can be achieved by the pressure difference generated by the cross-sectional area of the piston rod being smaller than that of the piston. They have fundamental differences in principle, so gas springs have significant advantages over ordinary springs. That is to say, the speed is relatively slow, the power change is not significant (usually within 1:1.2), and it is easy to control.

Dec 12,2023

How to choose a mold gas spring?

The selection of mold gas springs can be based on the following four aspects: 1. Selection of Elastic Pressure for Mold Gas Springs

Dec 12,2023

The working principle of gas springs and precautions for use

1. The installation of gas springs from bottom to top can reduce inner wall friction, ensure good damping coefficient, and maintain buffering capacity. 2. Move the installation position of the support rod over the centerline of the structure to avoid automatic door opening.

Dec 12,2023

Installation position and precautions of stainless steel gas springs

1. The piston rod of the stainless steel gas spring must be installed downwards and not inverted to reduce friction and ensure good shock absorption quality and cushioning performance. 2. Determining the installation position of the fulcrum is a guarantee for the normal operation of the stainless steel gas spring. The gas spring must be installed in the correct way, that is, when it is closed, let it move on the centerline of the structure, otherwise the gas spring will usually automatically reset.

Dec 12,2023

Reasonable usage techniques for gas springs

The gas spring is filled with nitrogen gas, using the principle of nitrogen gas. When compressed, the gas is compressed, and when released, the gas expands to generate lift. Material: Seamless steel pipe with a wall thickness of 1.0mm. Surface treatment: Black carbon steel is used for some pressures, and electroplating brushes are used for some thin rods. Gas springs are used on some piston rods, and there are also some techniques for using gas springs. What are the techniques for using gas springs? What are the reasonable techniques? Below, the manufacturer of the bracket gas spring will give you a brief introduction.

Dec 12,2023

What should be noted when modifying stainless steel gas springs?

Under the action of stainless steel gas springs, the piston rod moves by utilizing the pressure difference on both sides of the piston. Stainless steel gas springs have different structures and types to meet different application requirements. Compressed gas springs are mainly used in construction machinery. This type of gas spring mainly serves as a support.

Nov 14,2023