How to disassemble the gas spring?
Answer: Before disassembling the gas spring, drill a small circular hole at the bottom of the gas spring to allow the gas and oil inside to be discharged, and then disassemble it. But it cannot be dismantled casually as it may cause damage.
What seal is used for gas springs?
Gas spring manufacturer
Answer: The sealing components in gas springs are mainly composed of sealing rings, which mainly play a role in gas sealing. The gas spring manufacturer tells you that there is usually a metal ring in the middle of the sealing ring, surrounded by resilient plastic.
Can the gas spring be repaired if it is broken?
Answer: Once the gas spring is damaged, it cannot be repaired and can only solve the problem of damage.
The gas spring manufacturer tells you that there are some things to pay attention to when using gas springs, otherwise it will shorten the service life of the gas spring and even damage it. The main damage factors are as follows:
1、 Gas springs should not be machined.
2、 Do not weld gas springs and do not throw them into the fire.
3、 Do not place gas springs in areas with high temperature, high humidity, direct sunlight, and a lot of dust.
4、 The gas spring manufacturer tells you not to disassemble and modify the joints of the gas spring and hose. Accidental disassembly can cause parts to pop out under high pressure, which is very dangerous.
5、 The gas spring manufacturer tells you to be careful not to collide with the gas springs during storage and handling. Especially if the piston rod is scratched, the service life of the gas spring will be greatly shortened. Please pay special attention when using.