Leave A Message Here

Filling in your phone and email information will help us to contact you in a timely manner and resolve the issues you have raised as soon as possible.

Home page

Gas spring with protective sleeve

Gas spring with protective device is a protective mechanism added to the piston rod end on the basis of compressed gas spring

Category：

Tel：

+86-13584166868

E-mail：

zy@zyth.cn

Inquiry

Details

1、 Product features
A gas spring with a protective device is a device that adds a protective mechanism to the piston rod end on the basis of a compressed gas spring to prevent accidents and improve product trial. It is mostly used in mechanical equipment, fitness equipment, and military facilities.

2、 Product Outline Diagram

3、 Product parameters

Model	JY18	JY22	JY28
Outer diameter of cylinder mm	Φ18	Φ22	Φ28
Piston rod diameter mm	Φ8	Φ10	Φ14
Outer diameter of protective sleeve mm	Φ24	Φ27	Φ32
Stroke mm	100-300	100-350	100-620
Installation dimensions mm	350-800	350-1000	350-1500
Nominal force N	50~600	100-1000	500-1500

Installation and usage instructions for gas springs
a. The gas spring is a high-pressure product, and it is strictly prohibited to dissect, fire bake, or smash it at will to avoid accidents.
b. The gas spring piston rod should be installed downwards and not upside down, which can reduce friction and improve damping quality and buffering performance.
c. Gas springs should not be subjected to tilting or lateral forces during operation, and should not be used as handrails to avoid product bending, deformation, and damage.
d. To improve sealing, the surface of the piston rod must not be damaged, and it is strictly prohibited to apply paint and chemicals on the piston rod, otherwise it will affect its service life.
e. General operating environment temperature: -30 ℃~+80 ℃. If there are special requirements for the operating temperature, it can be customized.
f. The installation connection point should rotate flexibly and there should be no jamming phenomenon.
g. The size selection should be reasonable, the force should be good, and there should be a certain margin for the piston rod stroke size.

key word:：